Griffon T88 PVC Cement Solvent with Pipe Brush - 250 ml

Rigid PVC cement solvent for joining pipes, sockets and fittings with interference fit in pressure and drainage systems. With special pipe brush for quick and easy application. Suitable for diameters = 160 mm (pressure = 90 mm). Max. 16 bar (PN 16). Maximal tolerances 0.3 mm diametrical clearance / 0.2 mm press fit. Suitable for pipe systems conforming to EN 1329, 1452, 1453 and 1455.

Handling:

• Working Conditions: Do not use in temperatures = +5°C
• Coverage: Indication of the number of joints per 1 L

Directions for use: Cut pipes square, chamfer edges and deburr. Clean surfaces with griffon cleaner and cleaner cloth. Apply adhesive rapidly and evenly all around (4-6x) on both surfaces (pipe thickly, socket thinly). Assemble joint immediately. Remove excess adhesive. Do not load the joint mechanically for the first 10 minutes. Close packaging immediately after use.

Points of Attention: Brush size varies per packaging volume. Use a suitable packaging (brush) for the diameter to be bonded.

Stains/Residue: Remove adhesive stains with griffon cleaner and cleaner cloth.

• Colour: Colourless
• Capacity: 250 ml
• Density Approx: 0.88 g/cm³
• Flash Point: K1 (<21°C)
• Solid Matter Approx: 19 %
• Viscosity: Liquid
• Viscosity Approx: 375 mPa·s