Rawlplug R-RBP Rawlbolt Projecting Bolt - M10 x 90 mm

Rawlbolt first ever mechanical anchor in the world, forerunner of all of the later mechanical anchors.

• Cracked concrete C20/25-C50/60
• Non-cracked concrete C20/25-C50/60
• Unreinforced concrete
• Reinforced concrete

• Roller shutter doors
• Fire doors
• Steel work
• Security grills
• Heavy machinery
• Pipe work/duct work support
• Solid clay brick = 20MPa
• Hollow light weight concrete block LAC 5 = 5MPa
• Hollow sand-lime brick = 15MPa
• Concrete hollow floor block (eg. teriva)
• Hollow-core slab C20/25
• Hollow-core slab C30/37-C50/60
• Natural stone (after site testing)

• Drill a hole of required diameter and depth
• Clear the hole of drilling dust and debris (using blow pump or equivalent method)
• Remove nut and washer and insert anchor into hole
• Tap home with hammer until flush with surface
• Position fixture over the projecting bolt
• Add washer and nut and tighten to recommended torque

• Anchor Diameter: 10 mm
• Anchor External Diameter: 16 mm
• Anchor Length: 90 mm
• Fixture Maximum Thickness: 15 mm
• Fixture Hole Diameter: 11 mm
• Bolt Size: M10

• Fire

Note: When fixing into brick work, mortar joints should be avoided.