Bat Metalwork Vertical Restraint Standard Strap with 1 Bent - 1200 mm

BAT straps are manufactured to provide vertical restraint against wind pressure and uplift forces. Produced from 30 mm x 2.50 mm Galvanised steel coil supplied with 4 mm holes at 25 mm offset centres.

Hole diameters are 4 mm and they are holed at 12.50 mm grouped in threes, diagonally across the width of the strap.

The straps are manufactured from pre-Galvanised steel strips to BS EN 10327 : 2004, DX51D + Z275 or stainless steel to BS EN 10088-1 : 1995 : 1.4301.

• Anchorage of gable end to roof structure
• Fixing to wall plate and wall with one bend
• Floor level straps notched into parallel joist
• Floor level straps 150 mm x 650 mm long once bent and once twisted fixed to perpendicular joists

• Material: Galvanised Steel
• Length: 1200 mm
• Nominal Dimensions (Standard): 30 mm x 2.50 mm
• Bent Size: 100 mm