Soudal Genius Gun Plasterboard Adhesive Foam 750ml

Genius Gun Plasterboard Adhesive is a fast curing polyurethane adhesive which replaces traditional mortar based adhesives. Perfect for bonding plasterboard to walls. Ready to use without mixing which saves time, effort and money. Genius Gun® is a patented trigger mechanism, designed for easy use and single-handed operation. The re-sealable applicator enables the product to be re-used for up to 6 weeks after first use.

For the bonding of plasterboard onto walls, but can also be used on dry lining, rockwool, insulation board, bricks, concrete, plaster, wood, metal, aluminium, stone, ceramics, MDF, polystyrene, steel, lead, zinc, polyurethane, laminate, cork and chipboard.

• No mixing required
• Fast curing
• Re-usable for up to six weeks
• One-handed operation

Wear safety goggles and gloves. Ensure sufficient ventilation. Make sure surfaces are clean and free of grease and dust. Spraying water on the surfaces will improve adhesion and speed up curing. Shake can vigorously for 30 seconds. Repeat regularly for maximum yield. Flip open cap to release the trigger. Point the nozzle and apply pressue to the trigger; the amount of pressure defines speed at which foam extrudes. Apply Adhesive about 3cm from edge around the perimeter of the board and fill inside area in a zig-zag pattern. Wait until thread is formed between gloved finger and adhesive when briefly touching adhesive(usually about 4 minutes depending on conditions). Then press board firmly to wall surface for 30-60 seconds (depending on weight of board). Leave to cure for at least 1 hour before applying loads.