Klober Slate Vent with Cowl 600mmx300mm - Black

The Klober slate vent, with the integral downpipe, can also be used for soil ventilation or mechanical extraction when used with a 75 mm / 100 mm flexipipe.

• 600 mm x 300 mm double lap slates
• Man-made or natural slate
• For roofs with a pitch of 20°- 70°
• New build or re-roofing situations
• High or low level ventilation

The slate vent is positioned as standard and a hole is cut in the roofing underlay directly below the vent cap position. The two lower slates are trimmed to allow the pipe to pass through between them and centre nailed in position. The slate vent is positioned through the hole in the slates and centre nailed. NB. if using 500 mm x 250 mm slates cut away the side sections of the slate vent shown by guidelines on the underside. For headlaps in excess of 100 mm cut off the front section shown on the underside. Slating is continued as normal.

• Colour: Black
• Material: Rigid PVC
• Ventilation Area: 4500 mm²
• Vent Spacing: 5 mm Opening at 0.90 m Centres, 10 mm Opening at 0.45 m Centres
• Width: 300 mm
• Length: 600 mm
• Depth: 75 mm
• Weight: 11.30 kg