Klober Uni-Line Slate Vent Black 600mmx300mm and Adaptor

Uni-line slate vent is a universal in-line slate vent that suits most man-made and natural slates.

• 600 mm x 300 mm fibre and natural double lap slates
• High or low level roof space ventilation
• For roof pitches of 22.5° and above
• Most natural and fibre cement slates
• Batten cutting only required below 225 mm gauge (when used with 500 mm x 250 mm double-lap slates)

The vent is positioned directly in-line with the slates below, and an inverted T opening is cut within the underlay to accommodate the downpipe. To ensure the integrity of the underlay a Klober underlay seal is strongly recommended. Once the downpipe has been located through the underlay opening, the slate vent is located on and fixed to the slate batten. The slates either side of the vent are laid and trimmed if necessary.

• Material: UV Resistant Polypropylene
• Colour: Black